Features: high strength oil resistant
Use: single component anaerobic retaining adhesives, and in
Under the condition of air isolation, this product is in the two
Rapid solidification between two metal surfaces
Typical use: used for bonding cylindrical mating parts.
It is suitable for applications requiring low viscosity.
Viscosity: 100/150
Cure time: 30 minutes /24 hours
Shear strength: 3770
Relative density: 1.1
instructions：
1 surface treatment: derusting, degreasing, cleaning and drying
Rust can be mechanical or chemical methods: degreasing, cleaning and using appropriate organic solvent (such as acetone solution
For two to three times to soak in.
2 apply anaerobic adhesive: apply adequate amount of anaerobic adhesive to fill the gap.
3 assembly: should be positioned as soon as possible, after positioning can not move the workpiece
4 curing: general 1 hours anaerobic adhesive can achieve the use of strength, 24 hours to reach the maximum strength.