Properties: high strength fast curing
Application: used in dynamic load or periodic load
The load condition, which can be fixed with the gap reached
0.25 of the shaft hole with the initial curing in 5 minutes
Viscosity: 2000/3000
Cure time: 10 minutes /24 hours
Shear strength: 3625
Relative density: 1.09
instructions：
1 surface treatment: derusting, degreasing, cleaning and drying
Rust can be mechanical or chemical methods: degreasing, cleaning and using appropriate organic solvent (such as acetone solution
For two to three times to soak in.
2 apply anaerobic adhesive: apply adequate amount of anaerobic adhesive to fill the gap.
3 assembly: should be positioned as soon as possible, after positioning can not move the workpiece
4 curing: general 1 hours anaerobic adhesive can achieve the use of strength, 24 hours to reach the maximum strength.